|
|
|
|
|
Anaerobic flange sealant of series 5500 |
|
LETBOND Anaerobic flange sealant are best suited for small gap applications and rigid metal-to –metal assemblies. It provides a tough , resilient solvent and temperature resistance. No shrink and vaporize. |
Product performance: |
As the follow table |
Use the step : |
Directions for use 1.For best performance bond surfaces. Should be clean and free from grease. 2.Apply manually as a continuous bead or by screen printing to one surface of the flanges. 3.Low pressures may be used when testing to confirm a complete seal after assembly and before curing
|
|
Letbond
products chose
- Anaerobic flange sealant of series 5500 |
Anaerobic adhesives 5510 |
High viscosity , high temperature resistant up to 200 ℃ |
Anaerobic adhesives 5515 |
General purpose, high viscosity , excellent flexibility. Max gap fill is up to 0.25mm |
Anaerobic adhesives 5518 |
General purpose, resistant to fluid , specially suitable for the aluminium surface . Solvent resistant |
Anaerobic adhesives 5574 |
General purpose, temperature range to 150 ℃ |
Product |
Item No. |
Container |
Typical properties |
Viscosity (mpa.s) |
Gap Fill mm |
Cure Speed (hr) |
Tensile strength Kg/mm 2 |
Sheer Strength N/mm 2 |
Temperature range ( ℃ ) |
5510 |
551005 551030 |
50ml 300ml |
Red high temperature resistant |
paste |
0.4 |
24(hr) |
80 |
12 |
-55~+200℃ |
5515 |
551505 551530 |
50ml 300ml |
Purple, high viscosity flexible Good gap fill |
>50000 |
0.5 |
12(hr) |
80 |
12.5 |
-55~+150℃ |
5518 |
551805 551830 |
50ml 300ml |
Pink, no activation solvent resistant, suitable forthe aluminium surface |
paste |
0.5 |
12(hr) |
80 |
12.5 |
-55~+150℃ |
5574 |
557405 557430 |
50ml 300ml |
Orange, general purpose |
>50000 |
0.5 |
24(hr) |
80 |
10 |
-55~+150℃ | |
|
|
|
|
|